►PROGRAMMING TV PRESET CHANNEL LOCATIONS
Plug stereo headphones into console and wear
headphones for remaining steps of TV Programming.
Programming the first preset channel
If you clearly hear the TV audio that want to program in the
first preset channel location, then press the MUTE key
to save it.
“SAVE FREQ TO CHAN” will display.
If you do not hear the TV audio that you want, press the
VOL Λ key to select the desired TV transmitter audio,
and then press the MUTE key to save it.
NOTE: The order in which TV transmitter audio channels are
saved determines their displayed TV channel number when in
normal display mode. The first TV transmitter audio channel
saved will become “TV CHAN 1”, and the next TV transmitter
audio channel saved will become “TV CHAN 2”, etc.
►PROGRAMMING THE NEXT TV PRESET CHANNEL (and
remaining channels)
Repeatedly press the VOL Λ key until you hear the TV audio that
you want to program, and then press the MUTE key to save it.
Use this same procedure to program all other preset channel
locations for all remaining visible TV’s.
If you accidently save TV audio to the wrong preset channel
location, press the SOURCE key to unsave it. “UNSAVE
FREQ IN CH” will display. Then repeat STEP 9 for desired TV
audio source.
To exit programming mode, Press and hold the CLEAR ENTRY
key until display blanks and resets to normal operate mode.
TV Programming is now complete.
Should you need technical assistance for your TRUE Fitness product contact TRUE Fitness Technical Support at 1-800-883-8783
To Next Page
Loading...
Need help?
General
