True SPEC Series User Manual

24
TRUE
SPEC SERIES®: STR, STA & STG, ROLL-IN AND ROLL-THROUGH
www.truemfg.com
24
MAINTENANCE, CARE, CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be
followed, including the following. Disconnect power to unit.
TOOLS REQUIRED
STEP 1: Disconnect power to unit.
STEP 2: Remove all screws securing top screen to unit. See image 1.
STEP 3: Clean off accumulated dirt from the condenser coil and
the fan with a stiff bristle brush. After brushing the components off
vacuum all dirt residue from the coil, fan, and surrounding areas. See
image 2.
NOTE: If you cannot completely clean the condensing coil due to
its position, then the front louvered panel will need to be removed.
See Images 3 and 4.
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
• Air Tank or CO2 Tank
• Vacuum Cleaner
Rainshield removal, top screws.
Disconnect digital temperature control connections.
Rainshield removal, bottom screws.
1
2
3
4
5

True SPEC Series Specifications

General

Capacity	Varies by model
Door Bins	Varies by model
Freezer Shelves	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model