To Next PageTo Next Page
Need help?Do you have a question about the True TFP-48-18M-D-4 and is the answer not in the manual?
General| Model | TFP-48-18M-D-4 |
|---|---|
| Type | Food Prep Table |
| Width | 48 inches |
| Number of Doors | 1 |
| Material | Stainless Steel |
| Refrigeration Type | Self-contained |
| Temperature Range | 33°F to 41°F |
| Number of Drawers | 4 |
| Refrigerant | R290 |
| Voltage | 115 V |
| Hertz | 60 Hz |
| Phase | 1 |
| Horsepower | 1/5 HP |
| Adjustable Shelves | Yes |
| Cord Length | 7 ft |
Basic safety precautions to follow when using electrical appliances.
Instructions for safely disposing of old refrigerators to prevent child entrapment and environmental harm.
Guidelines for safely connecting the unit to electrical power, emphasizing grounding.
Recommendation against using adapter plugs due to potential safety hazards.
Emphasizes proper installation by qualified professionals for optimal unit performance.
Lists essential tools needed for installation and adjustments.
Step-by-step guide for safely removing the unit from its packaging.
Guidelines for positioning the unit and required ventilation clearances for proper operation.
Instructions for securing and installing legs or castors on various models like TSSU, TWT, TUC, TPP.
Procedures for leveling TFP models using castors and shims for stability.
Specific installation steps for pizza prep tables and anchoring the TSSU hood cover.
Method for leveling the cabinet internally using a level for proper operation.
Critical information on power supply, circuits, grounding, and voltage requirements.
Table detailing wire gauge requirements for 2% voltage drop in supply circuits.
Recommendations for initial startup, running empty, and checking for issues.
Importance of proper air circulation, especially for TPP units, and baffle placement.
Location, setting, and high altitude adjustment for TFP temperature controls.
Explanation of display codes and messages for TUC-24-HC/TUC-24G-HC models.
Description of how the LAE control manages compressor, fans, and defrost cycles.
Procedure for locking and unlocking the LAE controller to prevent unauthorized changes.
Steps to change the set point, which is the compressor shut-off temperature.
How to initiate a manual defrost cycle to clear accumulated frost from the evaporator coil.
Procedure to adjust the time duration between defrost cycles for the LAE controller.
Procedure for cleaning the chiller hose on specific TSSU models.
Instructions for installing shelves and locating the interior light switch.
Step-by-step guide for removing and installing drawers on TFP models.
Detailed instructions for cleaning the condenser coil to ensure efficiency and prevent failures.
Guidelines for cleaning and maintaining stainless steel surfaces to prevent corrosion and damage.
Recommendations for maintaining composite cutting boards to prevent warping.
Procedure for checking and tightening lid assembly thumbscrews for periodic maintenance.
Details of the product warranty for U.S.A. & Canada, including coverage and limitations.
