Chef Base Series
TEC_TM_159 | REV. A | EN 07/6/2022 Page 15 of 19
www.truemfg.com
Maintenance, Care & Cleaning (cont.)
Fig. 3. Verify all blockages have been removed.
Fig. 4. Condenser base bolt locations.
Fig. 1. Front louver grill screw locations. Fig. 2. Never brush across coil fins.
Fig. 6. Carefully slide the condensing unit back into position and reinstall the bolts.
Fig. 5. Carefully slide the condensing unit out.
To Next Page
Loading...
