Truma Diagnose Tool - Operation Instructions (Software); Diagnose Tool Program; Read Error Memory

13
Intended use
This software can show or change the operating statuses or
parameters for TIN-cable devices. Error protocols can be cre-
ated, exported or the error memory can be deleted. Locked
electronics can be unlocked as required.
User interface
The programs are operated with a mouse. Values are entered
using the keyboard.
Set language
1
1 Open the “Tools”
menu and click
“Language” to select
the menu language.
Operation instructions (software)
“Diagnose Tool” program
Prerequisites for operation:
Device from index
Combi 4 (E)
Combi 6 (E)
4/12A 6/12A
4/11 6/11
4/12 6/12
4/13 6/13
Combi D 6/06 6/07 4/01
Mover® all (Mover® S from 01/2008)
Start program
The “Live Display” program may not be active, it must be
closed first.
1
Diagnose Tool
2
1 Double-click the icon
on the desktop.
2. A start screen is shown
whilst the program is
loading.
Search for device
1
1 Open the “Tools”
menu and click “Start”
to start the search.
Read error memory
2 3
4
1
5
Display the current action
1 Device search.
2 The error memory is exported.
3 The content of the error memory is prepared for display.
4 Status bar.
5 Device for which an error was exported.