EasyManua.ls Logo

Truma MonoControl - Maintenance; Accessories

Truma MonoControl
68 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28 EN
Maintenance
The MonoControl gas pressure regulator is maintenance-free.
In Germany, the gas system must be retested every 2 years by a lique-
fied gas specialist (DVFG, TÜV, DEKRA). The test must be confirmed
on the respective test certificate (G 607).
In countries where testing is not mandatory, we recommend that the
gas system be tested every 2 years for your own safety.
The filter pad in the gas filter must be replaced every time the gas cyl-
inder is replaced (see gas filter operating instructions).
Accessories
High-pressure hoses (part no. list – see www.truma.com)
With country-specific connections
Flat gasket G.13 (part no. 50020-76300)
for high-pressure connection, M20x1.5 (G.13)
Plug-fit EisEx 12 V (part no. 53101-01)
Gas remote switch GS 8 (part no. 57014-01)
Gas remote switch GS 10 (part no. 57024-01)
both for shutting off the gas supply from inside the vehicle
Gas filter (part no. 50603-01)
suitable for all wall-mounted gas pressure regulators with inlet fitting
M20 x 1.5 (male thread – G.13). Install upstream of the gas pressure
regulator.

Table of Contents

Other manuals for Truma MonoControl

Related product manuals