Trust Laban - Macro Settings; Create and Record Macros; Manage Profiles; Restore Default Settings

GXT 188 Gaming Mouse - USER’S MANUAL
3
Macro Settings
7.
a
b
c
d
e
f
g
h
i
Create a Macro (Store a sequence of keys in the software)
- Go to the ‘BUTTON’ tab.
- Click on a button and then on ‘MACRO MANAGER’.
- Click on ‘NEW’ to create a new macro.
- Fill in the name of the macro and click on ‘OK’.
- Set the delay time between each action and/or the loop/repeat setting.
- Click to start recording the macro. Now enter your preferred macro sequence.
- Click to stop recording the macro. (max. 60 actions)
- Click ‘OK’ to return to the ‘BUTTON’ tab.
- The created macro is now available under the ‘MACRO’ function.
To assign a macro follow step 3 of this manual.
Profile Settings
8.
a
b
c
d
Select, Save or Load a profile
- Select one of the 5 profiles by clicking on the preferred profile.
- Click on ‘SAVE AS’ to save a setup, Click on ‘LOAD FILE’ to load a setup.
- Enter a name for the mouse setup you want to save, or choose the prefered profile to load.
- Click on ‘Save’ to save the setup, click on ‘Open’ to load the setup.
- Click on ‘Apply’  Your mouse setup is now saved or updated to your mouse.
9.
a
b
Restore default settings
- Click on ‘RESTORE’ to reset the current profile to factory default.
- Click on ‘RESET ALL’ to reset all profiles to factory default.