Trust Laban - Button Layout Overview; Software Installation Guide; Button Programming; Assign a Function to Buttons

GXT 188 Gaming Mouse - USER’S MANUAL
1
1. Button layout
a
- Button 1 (Default = Left mouse button)
b
- Button 2 (Default = Right mouse button)
c
- Button 3 (Default = Mid click)
d
- Button 4 (Default = Triple Fire key)
e
- Button 5 (Default = Forward)
f
- Button 6 (Default = Backward)
g
- Button 7 (Default = DPI +)
h
- Button 8 (Default = DPI -)
2. Installation
a
b
c
d
e
- Open the internet browser and go to www.trust.com/21789/driver.
- Click the “Download EXE” button to download the software.
- Click on the “21789_X.exe” and follow the installation wizard.
- Click on the “GXT 188 Gaming Mouse” shortcut to start the software.
- You can now start to configure the mouse. In the manual will be referred to ‘Apply’ to update the
mouse.
Updating the mouse can take up to 20 seconds depending on your system.
Button Programming
3.
a
b
c
Assign a function
- Click on the ‘BUTTON’ tab.
- Click on the button you want to re-assign
- Click on the function you want to assign.
- Click on ‘Apply’, the mouse is being updated.
At least one button has to be assigned as “Left Click”.