TSC MB340 Series - Menu Overview

- 38 -
6.2 Menu Overview
There are 6 categories for the menu. You can easy to set the settings of the printer without
connecting the computer. Please refer to following sections for more details.
This “Setting” category can set up the printer
settings for TSPL & ZPL2.
This "Sensor"option is used to calibrate the
selected media sensor. We recommend
calibrate the sensor before printing when
changing the media.
This "Interface" option is used to set the
printer interface settings.
This "Advanced" option is used to set the
printer LCD settings, initialization, cutter
type, media low warning setting %...etc.
This "File Manager" option is used to check/
manager the printer available memory.
This "Diagnostic" optin is used to review
printer to troubleshoot problems and other
issues.