TSC MB341T - Page 23

19
2.4.3 Function menu
◼ Configuration
Item
Description
Print
Common
Configures the printer using the TSPL command set. Refer to TSPL section for more information.
Adjust
Adjusts the print and stop location. Refer to TSPL section for more information.
Media
Configures the parameters that relate to the media type and sets the media sensor.
Calibration
Configures the parameters that affect the media calibration.
RS232
Configures the settings for RS-232.
Bluetooth
Configures the settings for Bluetooth.
Ethernet
Configures the settings for Ethernet.
802.1X
Sets the 802.1X authentication.
Wi-Fi
Configures the settings for Wi-Fi.
Raw Port Filter
Configures the settings for RAW port filter.
RTC Setup
Sets the date and time for the printer.
◼ Emulation
Item
Description
Z
Configures settings for the ZPL emulation
D
Configures settings for the DPL emulation