Sets the MQTT server and manages the CA certificate files.
Monitors the printhead’s health status.
Configures the SNMP (Simple Network Management Protocol) for the printer.
Sets the user/administrator name and its corresponding password.
Records the printer’s activities.
Provides quick access to the following functions:
Reset Printer
Configuration Page
Sensor Calibration
Factory Default
Ignore AUTO.BAS
Preferred Wi-Fi / Preferred Ethernet
Send File to Printer
Manages the files saved in the built-in memory.
Sends command sets or instructions to the printer.
Updates the printer’s firmware.
Clears the browsing record.
Switches to the classic user interface.
◼ Remote Panel
This option returns you to the Visualization Control Interface page.
To Next Page
Loading...
