42 43
7. OPERATION OF THE SYSTEM 7. OPERATION OF THE SYSTEM
9. WATCHMANSONIC RECEIVER MULTI SWITCH SETTING CHARTHoldthetransmitteragainstthereceiverrighthandside,asshown(Picture13),so that the white
dot on the transmitter is touching the black dot on the receiver (important!) forabout20
secondstoallowuniquecodetobetransferred.Barswillincreaseupthedisplayscreenandyou
willhearaclickingsound.Whenall10barsareshowntheywillashtoindicatethattheunique
codeistransferred.Whenmatchedthetransmittermustimmediatelybeplacedonthetank.
•IfyouareinstallingmorethanoneWatchmanSonicunitpleasewait15minutesbetweeneach
matching.
7. FITTING THE TRANSMITTER TO THE BASE
Screwthetransmitter(PartD)intothebase(Part
E).Ensurethetransmitterisverticalontopofthe
tankandlevel.
EnsurethattheWatchmanSonicunitisscrewed
correctlyintothebaseandthatthethreadshave
notcrossed,togiveasecureseal.
(SeePicture14)
8. CHECK THE LEVEL OF OIL IN THE TANK
Thebargraphrepresentsthelevelofoilinyourtank.
Note:Itcantakeupto2hoursfortherstaccuratereadingfromtheWatchmanSonictobe
displayed.