TuffStuff HTX-2000 - Step 10: Securing Weight Stacks

www.tu stu tness.comHTX-2000 Dual Stack-Funtional Trainer
21
Step 10
81
71
94
94
LIFT GUIDE RODS AND INSERT
SCREWS AS SHOWN.
100%
Fully Tighten
Fully Tighten
Wrench tighten all hardware in this step.
NOTES:
1. REPEAT ASSEMBLY STEP ON OTHER WEIGHT STACK.
2. ONCE GUIDE RODS ARE SECURED ON BOTH WEIGHT STACKS, TIGHTEN SCREWS (#85)
FROM PREVIOUS STEP.