6
DISPLAY AND KEY DESCRIPTION
ON/OFF Powers the Indicator On or Off if held for 2 seconds
HOLD Holds the weight (5 Hold options; can be changed in parameter settings)
TOTAL 1. Accumulates weights
2. Works with “Print” to perform the accumulation function and check the
accumulation result
UNITS Shifts between weighing units
COUNT Use the scale to count product based on a sample weight
TARE 1. Resets the scale to zero when there is something on the scale
(ex. Tare out the weight of a pallet to weigh only the product on it)
2. Clears the tare to see the gross weight (pallet + product)
ZERO Zero’s the scale
PRINT Print data
The scale is at zero
The scale is stable
Gross Shows you are in Gross weight mode (includes tare); default mode
Net Shows you are in Net weight mode (weight without tared weight)
pcs Shows you are in Counting mode
total Shows you are in Accumulation mode
hold Shows you are in Hold mode
lb The weight is shown in pounds
kg The weight is shown in kilograms
battery Flashes red = low battery, Solid red = charging, Green = fully charged
Over Flashes when weight is higher than set alarm parameter
Accept Flashes when weight is within the set alarm parameters
Under Flashes when weight is lower than set alarm parameter
Power
Back
Save and Exit
Arrow keys
Return/Enter
To Next Page
Loading...
Need help?
General
