Tunturi F20 - Console Display Features; Display Modes; Data Metrics Explained

18
English
- DIST setting range: 0.00~99.50 (Each increment is
0.5)
- PULSE setting range: 0-30~230 (Each increment is
1)
Down (Dail)
- Press DOWN Key to decrease value. Press and hold
the key to decrease the value faster.
- TIME setting range: 00:00~99:00 (Each decrement
is 1:00)
- CAL setting range: 0~9990 (Each decrement is 10)
- DIST setting range: 0.00~99.50 (Each decrement is
0.5)
- PULSE setting range: 0-30~230 (Each decrement is
1)
Mode/ Enter
- Choose each function by pressing MODE/ENTER
key.
- Press and hold MODE/ENTER key for 2 seconds to
reset all functions (same feature as the reset key if
press for 2 seconds).
Reset
- In setting mode, press RESET key once to reset the
current function figures.
- Press RESET key and hold for 2 seconds to reset all
function figures
Recovery
- After the console detects pulse signal, press the
RECOVERY key to enter recovery mode to monitor
heart rate recovery ability
Body Fat
- Test body fat% and BMI.
Total reset
- Console will restart over.
Explanation Display functions
Scan
- In SCAN mode, press MODE/ENTER key to choose
functions.
- Automatically scan through each mode in sequence
every 6 seconds.
- The sequence of display when press MODE/ENTER
key : TIME » DIST » CAL » PULSE » RPM/SPEED
Speed
- Range 0.0 ~ 99.9
- Without any signal being transmitted into the
monitor for 4 seconds during workout, SPEED will
display “0.0”
RPM
- Range 0 ~ 999
- Without any signal being transmitted into the
monitor for 4 seconds during workout, RPM will
display “0”
Time
- Without setting the target value, time will count up.
- When setting the target value, time will count down
from your target time to 0 and alarm will sound or
flash.
- Without any signal being transmitted into the
monitor for 4 seconds during workout, time will
STOP
- Range 0:00~99:59
Distance
- Without setting the target value, distance will count
up.
- When setting the target value, distance will count
down from your target distance to 0 with an alarm
sound or flash.
- Range 0.00~99.99
Calories
- Without setting the target value, calorie will count
up.
- When setting the target value, calories will count
down from your target calorie to 0 with an alarm
sound or flash.
- Range 0~9999
NOTE
This data is a rough guide for comparison of
different exercise sessions which cannot be used in
medical treatment
Pulse
- Current pulse will display after 6 seconds when
detected by the console.
- Without any pulse signal for 6 seconds, console will
display “P”.
- Pulse alarm will sound when current pulse is over
the target pulse.
- Range 0-30~230 BPM