21
* Long press (-), which resets all ride data, should be performed after each ride.
8.5. SUPPORT MODES
The Vado motor offers 6 Bike Assist Modes: TURBO, SPORT, ECO, OFF, SMART CONTROL,
and MICRO TUNE.
STANDARD BIKE ASSIST MODES:
TURBO MODE: Maximum power mode for high-speed sections and climbing.
SPORT MODE: Maximum control, with sufficient power on demand.
ECO MODE: Most efficient mode for maximum range while offering good power.
OFF MODE: The motor will not offer any assistance, but the display and lights will still function.
SMART CONTROL MODE: The motor, while pedaling, adjusts the power output based on
the ride parameters determined in the Mission Control App.
TURBO
TURBO
SPORT
ECO
OFF
SMART
WALK
SPORT
ECO
OFF
WALK
SMART
8.6
Fig. 8.6
As a quick reference, each mode is associated with a color. When you change modes, the
color on the display changes.
(+) Button - Increases the amount of support.
(-) Button - Decreases the amount of support.
On the remote, after reaching the strongest or weakest mode, the system will not
continue to switch. To reduce from TURBO to SPORT to ECO to OFF, you have to
press the (-) button. To increase from OFF to ECO to SPORT to TURBO, you have
to press the (+) button.
The Smart Control mode is only accessible when the bicycle is connected
to Mission Control and Smart Control mode is turned on. When more or less
motor support is needed or desired, Smart Control can be bypassed for a
short period of time by toggling between the OFF / SMART / TURBO modes.
Smart Control will then automatically reactivate after a short period of time.
Smart Control mode can only be turned off in Mission Control.
WALK ASSIST: This provides motor assist at 6 km/h / 3.7 mph to help push
the bicycle uphill when walking.
MICRO TUNE MODE:
1
SEC
100
90
80
70
60
50
40
30
20
10
95
8.7
Fig. 8.7
Micro Tune mode allows you to simultaneously change the support and peak power in 10%
increments whilst riding. When activated, the Micro Tune setting will show in the top left
To Next Page
Loading...
Need help?
General
