14
ENITESPTCNTCNSJP KR
WARNING! Be sure not to touch the speed sensor magnet while the wheel is
in motion. Also, the brake rotors may be extremely hot after riding.
7.5. RACKS AND FENDERS
The Vado is equipped with a front fender and a rear fender attached to the rear rack. An
optional front rack can be fitted to the bicycle via mounts behind the faceplate on the head
tube.
7.3 A
7.3 B
Fig. 7.3
The front fender is mounted directly to the fork crown (A). Using a 4 mm hex key torque the
bolt to 4 Nm / 35 in-lbf.
The front fender stays are mounted to the rear of the suspension forks (B), using a 3 mm
hex key torque the bolts to 4 Nm / 35 in-lbf.
7.4
Fig. 7.4
The rear rack is combined with the rear fender and is attached with bolts to mounting tabs
at the dropouts to support the vertical rack stays. Using a 5 mm hex key, torque the bolts to
9 Nm / 80 in-lbf.
To Next Page
Loading...
Need help?
General
