TURNTIDE VES-Artex PPFD72 - Safety Precautions; Safety Alert Key; General Safety Practices

To Next Page

To Previous Page

1-3

Pre-installation

Safety Precautions

Safety Alert Key

Indicates an imminently hazardous situaon which, if

not avoided will result in death or serious injury.

Indicates a potenally hazardous situaon which, if

not avoided could result in death or serious injury.

Indicates a potenally hazardous situaon which, if

not avoided could result in minor or moderate injury.

Used to address pracces not related to personal

injury.

Read and understand this manual prior to installation or servicing your VES-Artex product.

For the safe handling of VES-Artex products, you will nd the following safety words DANGER, WARNING, CAU-

TION and NOTICE throughout this manual. These will identify safety levels as described below. Failure to obey

the safety measures may result in death, serious injury or damage to the product.

Use best industry practices when handling tools and equipment. When handling VES-Artex products follow all

federal, state, and local safety codes as it related to the work being performed.

General Safety

1. Verify lifting equipment is safe prior to fan handling.

2. Electrocution. Disconnect fan prior to any service.

3. Electrical wiring must be completed by qualied personnel in accordance

with all applicable codes.

4. Verify the electrical system is properly grounded prior to installing fans.

1. Keep hands and objects away from rotating fan blades.

2. Fans with blades rotating below 7 feet (2.3 meters) must be fastened with guards.

3. Heavy load. Handle fans with a safe and secure method.

4. Falling damage. Mount fans with VES-Artex approved hardware.

5. Always wear eye protection when installing and servicing VES-Artex products.

1. Follow all federal, state and local safety codes as it relates to work being performed.

1. Ensure fan(s) are not damaged prior to installation.

2. Ensure all fan parts are accounted for prior to installation.