32
7.1 Tire pressure Display: psi, kPa & Bar (Pressure units)
In the Driving Mode, the default value for tire pressure is set to 80 psi (See Section 8.3 Setting Tire
Pressure to change the default pressure unit and/or value). Below is the default value for each unit of
pressure selected:
Default tire pressure value
Note: When using kPa as the unit of air pressure, the monitor will display “Hi” if the air pressure is over
999kPa. The actual air pressure values will be displayed numerically when the unit of measure selected is
in psi or Bar.
To Next Page
Loading...