39
8. Settings Mode Menu:
To enter the Settings Mode menu from Driving Mode, press and hold the for 3 seconds. At any time,
press and hold for another 3 seconds to switch back to Driving Mode. User will have 60 seconds to
make any changes for each TPMS parameter setting. If no change is made within that period, a long tone
beep will sound from the receiver to warn the user that the setting was not programmed, and receiver
display will return to Driving Mode.
The receiver supports TPMS parameter settings for up to three (3) vehicle and/or trailer combinations.
Follow the settings list below to configure the relative parameters for each vehicle and/or trailer
combination. Fig 8 Settings Mode Menu Screen Chart shows the sequence of Setting Mode screens.
8.1 Vehicle Selection
8.2 Setting the Number of Wheels to Display
8.3 Setting Tire Pressure
8.4 Setting Tire Temperature
8.5 Tire Sensor ID Pairing to the Receiver
8.6 Setting Tire Position on the Receiver
To Next Page
Loading...