37
In Driving Mode, the user can monitor the vehicle/trailer battery voltage of the battery that the repeater is
installed and connected to. On the battery voltage display screen, the “
bat” to the left of the vehicle
diagram stands for battery and the battery voltage value is displayed to the right side of the vehicle diagram.
The repeater requires 12/24V battery for proper operation.
If the vehicle/trailer battery voltage drops below 11.5 or 23V, the following alarm indicators will alert the
user of a low battery voltage issue:
Power in the
Vehicle/Trailer
Battery
(12/24V)
Image
• The battery voltage value will display in red text
The alarm indicator will continue until the issue has been resolved and the vehicle/trailer battery voltage
has returned to normal range.
The default setting for the display in Driving Mode is to cycle between the tire pressure, tire temperature
and vehicle/trailer battery voltage screens. If the user would like to monitor the vehicle/trailer battery voltage
To Next Page
Loading...