Need help?Do you have a question about the Tuthill GG030 and is the answer not in the manual?
General| Series | GG |
|---|---|
| Pump Type | Gear Pump |
| Material | Cast Iron |
| Power Source | Electric |
| Maximum Pressure | 100 PSI (6.9 bar) |
Guidance on optimal pump installation, including suction and discharge line considerations.
Steps for periodic inspection and general repair of pump components.
Steps for partial disassembly to rebuild internal components without removing the housing.
Procedure to remove the drive module assembly from the pump housing.
Detailed steps for complete pump disassembly.
Detailed procedure for adjusting the end clearance of the pump.
Procedure for adjusting the pressure setting of the relief valve.
Guidance for diagnosing and resolving common pump operational problems.
Troubleshooting steps for when no fluid is delivered by the pump.
To Next Page