To Next PageTo Next Page
Need help?Do you have a question about the Tuttnauer T-Edge 11 and is the answer not in the manual?
Provides contact details for the manufacturer and US correspondence.
Lists the regulations and quality standards the T-Edge 11 complies with.
Explains the meaning of symbols used on labels and within the manual.
Details the autoclave's features, operation, and connectivity options.
Specifies the medical and surgical goods suitable for sterilization.
Identifies the qualified personnel authorized to operate the autoclave.
Outlines the terms and duration of the manufacturer's warranty.
Details the warranty registration process and conditions.
Guidance on inspecting the autoclave for damage upon delivery.
Provides the overall external dimensions of the T-Edge 11 autoclave.
Recommends cabinet sizes for adequate cooling and ventilation.
Lists various properties of the device including chamber size and load capacity.
Details the electrical specifications like power, voltage, and amperage.
Specifies the utility requirements for water, drain, and power supply.
Provides details on sound levels and heat transmission.
Specifies the water quality standards for feed and condensate water.
Provides essential safety notes and precautions for autoclave users.
Describes the safety devices and features integrated into the autoclave.
Illustrates and labels the various components visible from the front.
Illustrates and labels the various components visible from the rear.
Provides instructions for safely moving and carrying the autoclave.
Specifies requirements for placing the autoclave and environmental conditions.
Details how to connect the autoclave to power and water supplies.
Provides recommendations for storing the autoclave.
Guides the user through the initial steps to power on and set up the device.
Details important steps to perform before the first operation, like resetting pressure.
Step-by-step guide on how to power on the autoclave.
Instructions on how to fill the clean water reservoir.
Detailed steps for filling the clean water reservoir with appropriate water.
Directs user to water quality requirements in Section 1.12.
Explains how to set the current date and time on the autoclave.
Explains the differences and applications of Class S and Class B sterilization cycles.
Details the procedure for upgrading or switching between Class S and Class B.
Describes the functions and icons of the autoclave's home screen.
Explains how to open the autoclave door, including safety interlocks.
Guides the user through the process of selecting and starting a sterilization cycle.
Details the Virus Protect program for eliminating viruses before sterilization.
Lists and describes the available sterilization and test programs.
Explains the notifications for cycle success or failure.
Provides instructions on how to stop or abort a running sterilization cycle.
Describes how to create and use custom sterilization programs.
Explains how to access and print the history of performed sterilization cycles.
Details how to safely open the door and unload the sterilized items.
Explains how to check the waste water level and related alarms.
Provides instructions for draining the clean and waste water reservoirs.
Outlines the daily maintenance tasks for the autoclave.
Details the weekly maintenance tasks for the autoclave.
Instructs on performing the chamber clean process weekly.
Outlines the monthly maintenance tasks for the autoclave.
Covers scheduled maintenance tasks like filter replacement.
Provides steps for replacing the air filter.
Details the monthly procedure for cleaning the drain filter.
Provides steps for replacing the drain filter.
Lists and describes informative screen symbols and their meanings.
Provides a list of error messages and troubleshooting guidance.
Provides general information about the optional printer and its capabilities.
Safety precautions related to the printer installation and operation.
Step-by-step guide for the initial installation of the printer.
Instructions on how to open the printer's top cover for paper loading.
Guides on loading thermal paper rolls or label rolls into the printer.
Details how to connect interface cables to the printer.
Explains how to connect power and interface cables to the printer.
Provides instructions on how to power on and start the printer.
Guides the user through setting up printer definitions and parameters.
Provides a general overview of the Chamber Clean program and its purpose.
Details the step-by-step procedure for cleaning the autoclave chamber.
General| Brand | Tuttnauer |
|---|---|
| Model | T-Edge 11 |
| Category | Laboratory Equipment |
| Language | English |
