To Next PageTo Next Page
Need help?Do you have a question about the Tuttnauer T-Top 10 and is the answer not in the manual?
Details about the manufacturer, applicable regulations, and intended use of the device.
Comprehensive overview of the autoclave's features, dimensions, properties, and electrical data.
Information regarding product warranty, service, and inspection procedures upon receiving the unit.
Specifies the crucial quality standards for water used in the autoclave to prevent damage.
Essential safety guidelines and precautions for operating the autoclave safely.
Instructions and recommendations for maintaining the device's security and protecting against threats.
Visual identification and labeling of the autoclave's key components and parts.
Guidelines for safely lifting, positioning, and environmental conditions for autoclave installation.
Procedures for utility connections, proper storage, and initial device configuration steps.
Essential checks and procedures to perform before starting the autoclave for the first time.
Step-by-step guide for turning on the autoclave and filling the water reservoir.
Instructions for setting the device's date and time and an overview of Class S sterilization programs.
Explanation of the home screen layout, icons, and navigation options on the control panel.
Detailed steps for opening the door, starting, running, and aborting sterilization cycles.
Information on cycle success/failure notifications, results, and accessing cycle history logs.
Procedures for checking waste water levels, draining reservoirs, and adjusting the door seal.
Routine cleaning and checks required for daily and weekly maintenance of the autoclave.
Scheduled maintenance activities including chamber cleaning, descaling, and gasket checks.
Instructions for replacing air filters and cleaning drain filters for optimal performance.
Explains various informative symbols, icons, and operating messages displayed on the screen.
Lists potential error messages and provides guidance on troubleshooting and resolving issues.
Guidance on installing and configuring an optional TSC printer with the autoclave.
Information on the built-in printer parts, output format, and general printer information.
Step-by-step instructions for replacing the paper roll in the printer.
Introduction to the System Clean program for descaling and cleaning the autoclave.
Detailed instructions and important steps for performing the System Clean procedure.
General| Brand | Tuttnauer |
|---|---|
| Model | T-Top 10 |
| Category | Laboratory Equipment |
| Language | English |
