TUYA N1TY - Installation Instructions; Step 1: Drilling Holes; Step 2: Install Latch; Step 3: Fix Bolts on Outdoor Unit

- 4 -
Step 1
According to the map drilling holes on the door
Step 2
Install the single latch (D) with screws (G)
Step 3
Fixed bolts (E) on outdoor unit (A)
Note:
1) Check the required backset (60mm or 70mm).
2) Align the template along the vertical center line of the
single latch (E) at the desired height,and tape it to the door.
3) Mark the holes first, then start drilling.
Note:
The single latch has TWO backset
options: 60mm or 70mm, please adjust
it by yourself.
D
G
E
This side up