01 CAUTION
7
4K /UHD HDR Emulation LCD Monitor
VESA WALL MOUNTING
• When mounting on the wall bracket, x the monitor using 4 pieces of M4 x 10mm screws.
• Use the 100mm x 100mm VESA MOUNTING holes on the rear housing.
• Do not install on a place other than a vertical wall.
• Do not use screws longer then the standard dimension, as they may cause damage to the
inside to the monitor.
• Do not tighten the screws too much. It may damage the monitor or make the monitor fall
and cause personal injury. Vidente(TVLogic) is not liable for these kinds of accidents.
• Remove the stand before installing the monitor on the wall using the wall mount kit.
• Do not install your wall mount kit while the monitor is plugged in.
It may result in personal injury due to electric shock.
To Next Page
Loading...
Need help?
General
