TVLogic LUM-181H User Manual

01 CAUTION
4
4K /UHD HDR Emulation LCD Monitor
● Always use set voltage.
LUM-181H
- AC 100 ~ 240V (50~60Hz)
- DC 12V/8A ~ 24V/4A
LUM-242H
- AC 100 ~ 240V (50~60Hz)
- DC 24V/6.5A
• All operang instrucons must be read and
understood before the product is operated.
• These safety and operang instrucons must
be kept in safe place for future reference.
• All warnings on the product and in the
instrucons must be observed closely.
• All operang instrucons must be followed.
• Do not use aachments not recommended
by the manufacturer. Use of inadequate
aachments can result in accidents.
• This product must be operated on a power
source specied on the specicaon label.
If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on baeries or another power source, refer to
the operang instrucons.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resng on them. Check the cords
at the plugs and product.
• Do not overload AC outlets or extension cords.
Overloading can cause re or electric shock.
• Never insert an object into the product
through vents or openings. High voltage ows
in the product, and inserng an object can
cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid
on the product.
• Do not aempt to service the product yourself.
Removing covers can expose you to high
voltage and other dangerous condions.
Request a qualied service person to perform
servicing.
• If any of the following condions occurs,
unplug the power cord from the AC outlet,
and request a qualied service person to
perform repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly
as described in the operang instrucons.
Do not touch the controls other than those
described in the operang instrucons.
Improper adjustment of controls not
described in the instrucons can cause
damage, which oen requires extensive
adjustment work by a qualied technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condion. Any noceable abnormality in
the product indicates that the product
needs servicing.
• In case the product needs replacement parts,
make sure that the service person uses
replacement parts specied by the
manufacturer, or those with the same
characteriscs and performance as the original
parts. Use of unauthorized parts can result in
re, electric shock and/or other danger.
• Upon compleon of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operang condion.
• The power cord plug shall be connected to a
main socket outlet with a protecve earthing
connecon.
• Unplug the power cord from the AC outlet
when happening any problem in the product.
• When mounng the product on a wall or
ceiling, be sure to install the product
according to the method recommended by the
manufacturer.

TVLogic LUM-181H Specifications

General

Brand	TVLogic
Model	LUM-181H
Category	Monitor
Language	English