17
LVM-171W / 241W / 401W / 461W / 571W
· MARKER MAT
This item darkens the area of the outside of MARKER. The degrees of darkness are
between OFF(0) and (7). The higher the number the darker the area outside of the
Marker becomes
· MARKER COLOR
This item controls the color of the MARKER lines. Available colors are white, gray,
black, red, green and blue.
· MARKER THICKNESS
This item controls the width of the marker. The degrees of width are between 1 and 7.
· USER MARKER H1 / H2
This item controls the position of up to two user defined Horizontal Marker lines.
· USER MARKER V1 / V2
This item controls the position of up to two user defined Vertical Marker lines.
[4] REMOTE menu
This product provides a REMOTE CONTROL mode. The user may connect an
RJ-45 jack to the REMOTE terminal on the rear of the unit and designate a
function for each pin.
The user designates function for PIN 1~PIN 6. PIN 7 is POWER ON/OFF use only, PIN
8 is the GND. The selectable functions are as follows:
To Next Page
Loading...
Need help?
General
