COMMAND COMMAND DESCRIPTION
Character size/spacing
ESC g Select 15 cpi pitch*
ESC SI Select 20 cpi pitch*
ESC S Superscript printing ON
ESC V Set Intercharacter spacing*
Character style
ESC # HSD print mode ON
ESC % G Italics ON
ESC % H Italics OFF
ESC DEL F Select Font by pitch and point
Custom Characters
ESC = Down line load characters
ESC $ Copy ROM character set to RAM
character set.*
Cut-sheet feeder control
ESC EM Insert /eject paper*
Graphics
ESC K Single density graphics
ESC L Double density graphics
ESC Y Double Speed/double density graphics
ESC Z Quadruple Density graphics
Horizontal control
BS Backspace
CR Carriage return
ESC X Margin setting, left & right
HT Horizontal Tab
ESC D Set horizontal tab
ESC D Clear Horizontal tab settings
ESC % B Set 4-column tabulation*
ESC DLE @ Set print position*
ESC | Set relative dot position*
75
To Next Page
