9. PRE - DELIVERY INSPECTION (PDI)
4.10 Rear fender alignment
4.11 Steering operation
4.12 Front & Rear brake play
4.13 Front & Rear Tyre Pressure
4.14 Engine / Gear box Oil Level - Dipstick
4.15 Gear lever & brake pedal position w.r.t rider footrest
5 Start the Engine after petrol in tank
5.1 Startability
5.2 Kick / Self starter functioning
5.3 Ignition cut off / Kill switch function
5.4 Cold recovery - Throttle response
5.5 Tachometer function
5.6 Oil / Fuel leak if any
5.7 Any abnormal Noise
6 Electrical check - Engine running
6.1 Head lamp & Parking lamp ON / OFF
6.2 High beam Low beam & Focus
6.3 Rear combination lamp - Brake & Tail (LED)
6.4 Speedo panel bulbs (LED)
6.5 Turn signal lamp (Front & Rear)
6.6 Battery terminal - Jelly application
6.7 Horn function
7 Road Trial
7.1 Gear Shifting
7.2 Front & Rear Brake Effectiveness
7.3 Speedo / Odo / trip meter display and function
7.4 Suspension - Front & Rear
7.5 Steering shake - On braking
7.6 Idling RPM stability (Use Tachometer to evaluate)
7.7 Any other abnormality
8 Accessories fitment
8.1 Mirrors alignment
8.2 Tool kit
9 Any other Observations (Specify)
9.1
-12-
NexGenBikes.com
To Next Page
Loading...
