TVS PHOENIX - Chassis Specifications; Tyre Specifications; Brakes & Electrical System

CHASSIS
Overall length : 1985 mm
Overall width : 740 mm
Overall height : 1065 mm
Ground clearance : 165 mm
Wheel base : 1265 mm
Kerb weight (with toolkit
and 90% of fuel) : 114 kg (drum brake)
: 116 kg (disc brake)
Pay load : 130 kg
Maximum laden weight : 244 kg (drum brake)
: 246 kg (disc brake)
Steering angle : 88°
Caster angle : 25°
Frame : Single cradle tubular frame
Front suspension : Telescopic oil damped
Rear suspension : Twin, 5 step adjustable dual
spring canister gas shocks
with rectangular swing arm.
Trail length : 65 mm
TYRE
Tyre size
Front Drum : 2.75 x 17 (tube type)
Disc : 2.75 x 17 (tubeless) *
Rear Drum : 90/90 x 17 (tube type)
Disc : 90/90 x 17 (tubeless)*
Tyre pressure
2
Front : 1.75 kg/cm (25 PSI)
2
Rear - solo : 2.25 kg/cm (32 PSI)
2
Rear - dual : 2.53 kg/cm (36 PSI)
BRAKES
Front : Hand operated, 240 mm dia.
disc*
: Hand operated, internally
expanding 130 mm dia. drum
Rear : Foot op erated , interna l l y
expanding 130 mm dia. drum
ELECTRICAL
Type : Fly wheel magneto, AC
Ignition system : DC - Digital TCI
Spark plug : BOSCH UR4KC
Spark plug gap : 0.6 ~ 0.8 mm
Battery type : 12V, 5.0 Ah (lead acid type)
Generator : Fly wheel magneto 12V, 130W
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
-63-
* Applicable only for Disc version