ENGLISH
Chapter 2 — Getting Started
Hot Key Switch
In Display Combination, there are six options
available by pressing the Fn+F2 keys :
LCD>CRT>LCD+CRT>TV>LCD+TV>CRT+TV.
LCD is the default value for Primary.
Tip: To ensure trouble-free video output, the first
time you use an external monitor, change the output in
the Display Properties dialog box. After successfully
switching modes, you may use the video function keys.
Note: Light or dark dots may appear on the LCD due to
technical limitations of LCD manufacturing. This will
not effect normal operation of the LCD.
30
To Next Page
Loading...