3.5.2 DF Common Options Submenu
DRAM scrub time
Provide a value that is the number of hours to scrub memory.
Disabled / 1 hour / 4 hours / 8 hours / 16 hours / 24 hours / 48 hours /
Auto
Redirect scrubber control
Control DF::RedirScrubCtrl [EnRedirScrub]
Disabled / Enabled / Auto
Memory interleaving
Controls fabric level memory interleaving (AUTO, none, channel, die, socket). Note
that channel, die, and socket has requirements on memory populations and it will
be ignored if the memory doesn‟t support the selected option.
None / Channel / Die / Socket / Auto
Memory interleaving size
Controls the memory interleaving size. The valid value are AUTO, 256 bytes, 512
bytes, 1 Kbytes or 2Kbytes. This determines the starting address of the interleave
(bit 8,9,10 or 11).
256 Bytes / 512 Bytes / 1 KB / 2 KB / Auto
To Next Page
Loading...
