TYAN S8050 - Page 122

http://www.tyan.com
122
Determinism Control
Auto = Use the fused Determinism
Manual = User can set customized Determinism
Manual / Auto
APBDIS
Algorithm Performance Boost Disable
0 / 1 / Auto
DF Pstate
DfPstate index to set when APBDIS=1 [0-4]
0
Power Profile Selection
[0= High Performance Mode (DEFAULT);
1= Efficiency Mode;
2= Maximum IO Performance]
High Performance Mode / Efficiency Mode / Maximum IO Performance
BoostFmaxEn
Auto = Use the default Fmax
Manual = User can set the boost Fmax
Manual / Auto
DF Cstates
Enable or Disable Data Fabric to go to a low-power state when the processor has
entered Cx states
Disabled / Enabled / Auto
CPPC
Enable = Enable the feature :
Disable = Disable the feature
Disabled / Enabled / Auto
HSMP Support
Select HSMP support enable or disable
Disabled / Enabled / Auto