TYAN S7010 - User Manual

http://www.tyan.com
1
S7010
Version 1.1
Copyright
Copyright © 2010 MiTAC International Corporation. All rights reserved. TYAN
®
is a
registered trademark of MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN
®
is a trademark of MiTAC International Corporation.
Intel
®
5500 Series and combinations thereof are trademarks of Intel Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE is a trademark of Novell.
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.

Summary

Chapter 1: Introduction

1.1 Congratulations

Welcomes the user and introduces the product S7010.

1.2 Hardware Specifications

Details technical specifications of the motherboard and its components.

1.3 AST2050

Provides information or reference for the AST2050 component.

Chapter 2: Board Installation

2.1 Board Image

Displays a visual representation of the motherboard layout.

2.2 Block Diagram

Illustrates the system architecture and component connections.

2.3 Board Parts, Jumpers and Connectors

Identifies physical components, jumpers, and connectors on the board.

2.4 Installing the Processor and Heat Sink

Guides on proper installation of CPU and cooling solutions.

2.5 Thermal Interface Material

Explains the types and application of thermal paste or pads.

2.6 Finishing Installing the Heat Sink

Covers final steps for heat sink attachment and fan connection.

2.7 Tips on Installing Motherboard in Chassis

Offers advice on mounting the motherboard securely within the case.

2.8 Installing the Memory

Details the procedure and guidelines for installing RAM modules.

2.9 Attaching Drive Cables

Explains how to connect SATA and other drive cables.

2.10 Installing Add-In Cards

Provides guidance on inserting expansion cards into PCI/PCIe slots.

2.11 Installing I;O Shield

Describes the process of installing the rear panel I/O shield.

2.12 Connecting External Devices

Illustrates connections for rear panel ports like USB, VGA, LAN.

2.13 Installing the Power Supply

Details the connections for power supply units to the motherboard.

2.14 Finishing up

Covers final checks and considerations before closing the chassis.

Chapter 3: BIOS Setup

3.1 BIOS Main Menu

Presents the primary interface for BIOS configuration.

3.2 Advanced Menu

Offers detailed system configuration options beyond basic settings.

3.3 PCI PnP Menu

Manages resource allocation and conflict resolution for PCI devices.

3.4 Boot Menu

Controls system boot order and related settings.

3.5 Security Menu

Configures system passwords and boot sector protection.

3.6 Chipset Menu

Allows customization of Intel chipset features.

3.7 Exit Menu

Options for saving, discarding, or loading BIOS settings.

Chapter 4: Diagnostics

4.1 Beep Codes

Explains audible error codes indicating hardware issues during boot.

4.2 Flash Utility

Guides on updating the system's BIOS firmware.

4.3 AMIBIOS Post Code

Lists checkpoints indicating BIOS pre-boot process status.

Glossary

Technical Support

Help Resources

Lists channels and information sources for user assistance.

Returning Merchandise for Service

Outlines the process for product returns and warranty service.

TYAN S7010 Specifications

General

Form Factor	SSI EEB
PCIe x16 Slots	2
PCIe x8 Slots	1
PCIe x4 Slots	1
PCI Slots	2
Memory Type	DDR3
LAN	2 x Gigabit Ethernet
Power Connector	24-pin ATX