TYAN S7010 - Cpu Configuration

42
http://www.tyan.com
3.2.1 CPU Configuration
You can use this screen to view CPU Configuration Menu. Use the up and down
arrow (/) keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Configure advanced CPU settings
Module Version: xx.xx
Manufacturer: Intel
Intel
®
CPU: @ xxxx @ x.xxGHz
Frequency: xxxGHz
BCLK Speed: xxxxMHz
Cache L1: xxKB
Cache L2: xxxxKB
Cache L3: xxxxKB
Ratio Status: Unlocked (Min:12, Max:18)
Ratio Actual Value: 18
Ratio CMOS Setting
C1E Support
Hardware Prefetcher
Adjacent Cache Line Prefetch
L1 Data Prefetcher
Data Reuse Optimization
Max CPUID Value Limit
Intel
®
Virtualization Tech
Execute-Disable Bit Capability
Intel
®
HT Technology
Active Processor Cores
A20M
Intel
®
SpeedStep
TM
Tech
Intel
®
TurboMode Tech
Intel
®
C-STATE Tech
C State package limit setting
C1 Auto Demotion
C3 Auto Demotion
ACPI T State
[22]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[All]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Enabled]
[Enabled]
[Enabled]
This should be enabled in
order to enable or disable
the “Enhanced Halt
State”.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit