TYAN S7010 - 2.8 Installing the Memory

27
http://www.tyan.com
2.8 - Installing the Memory
Before installing memory, ensure that the memory you have is compatible with
the motherboard and processor. Check the TYAN Web site at: www.tyan.com
for details of the type of memory recommended for your motherboard.
The following diagram shows common types of DDR3 memory modules.
Key points to note before installing memory:
 Automatic memory bus frequency setting based on memory configuration
and memory SPD information (to be adjusted by BIOS)
 Supports up to 96GB (8GB x 12 DIMMs)
 Supports un-buffered ECC/Non-ECC modules
 Supports ECC Registered DDR3-800/1066/1333 memory modules
 Supports SR, DR, QR Rank Module
 All memory must be of the same type and density
 Always populate from DIMM0 first