TYAN S8050 - Page 155

http://www.tyan.com
155
Status Code Description
S3 Resume Error Codes
0xE8 S3 Resume failed
0xE9 S3 Resume PPI not found
0xEA S3 Resume Boot Script error
0xEB S3 OS wake error
0xEC – 0xEF Reserved for future AMI error codes
Recovery Progress Codes
0xF0 Recovery condition triggered by firmware (Auto recovery)
0xF1 Recovery condition triggered by user (forced recovery)
0xF2 Recovery process started
0xF3 Recovery firmware image is found.
0xF4 Recovery firmware image is loaded.
0xF5 – 0xF7 Reserved for future AMI progress codes
Recovery Error Codes
0xF8 Recovery PPI is not available.
0xF9 Recovery capsule is not found.
0xFA Invalid recovery capsule
0xFB – 0xFF Reserved for future AMI error codes
PEI Beep Codes
# of Beeps Description
Progress Codes
1 Memory not installed
1
Memory was installed twice (installPEIMemory routine in PEI Core
called twice).
2 Recovery started
3 DXEIPL was not found.
3 DXE Core Firmware Volume was not found.
4 Recovery failed
4 S3 Resume failed
7 Reset PPI is not available.
DXE Phase
Status Code Description
0x60 DXE Core is started.
0x61 NVRAM initialization
0x62 Installation of the South Bridge Runtime Services