TYAN S8050 - Page 158

http://www.tyan.com
158
Status Code Description
0xD5 No Space for Legacy Option ROM
0xD6 No Console Output Devices are found.
0xD7 No Console Input Devices are found.
0xD8 Invalid password
0xD9 Error loading Boot Option (LoadImage returned error)
0xDA Boot Option is failed (StartImage returned error).
0xDB Flash update is failed.
0xDC Reset protocol is not available.
DXE Beep Codes
# of Beeps Description
1 Invalid password
4 Some of the Architectural Protocols are not available.
5 No Console Output Devices are found.
5 No Console Input Devices are found.
6 Flash update is failed.
7 Reset protocol is not available.
8 Platform PCI resource requirements cannot be met.
ACPI/ASL Checkpoints
Status Code Description
0x01 System is entering S1 sleep state.
0x02 System is entering S2 sleep state.
0x03 System is entering S3 sleep state.
0x04 System is entering S4 sleep state.
0x05 System is entering S5 sleep state.
0x10 System is waking up from the S1 sleep state.
0x20 System is waking up from the S2 sleep state.
0x30 System is waking up from the S3 sleep state.
0x40 System is waking up from the S4 sleep state.
0xAC
System has transitioned into ACPI mode. Interrupt controller is in
APIC mode.
0xAA
System has transitioned into ACPI mode. Interrupt controller is in
APIC mode.