TYAN S8050 - Page 84

http://www.tyan.com
84
3.3.16.2 Host iSCSI Configuration
Please follow the instructions to initiate the iSCSI function.
Step 1.
Select Advanced  CSM Configuration  Network  [UEFI].
Step 2.
Select Advanced  Network Stack Configuration  Network Stack  [Enabled]
Step 3.
Save changes and reboot.
iSCSI Initiator Name
The worldwide unique name of iSCSI Initiator. Only IQN format is accepted. Range
is from 4 to 223.
Add an Attempt
Add one or more attempts
Attempt 1
Attempt 2
Attempt 3