http://www.tyan.com
89
Configure ISID
OUI-format ISID in 6 bytes, default value is derived from MAC address. Only last 3
bytes are configurable. Example: update 0ABBCCDDEEFF to OABBCCF07901 by
input F07901.
Enable DHCP
Enable DHCP.
Disabled / Enabled
Initiator IP Address
Enter IP address in dotted-decimal notation.
Initiator Subnet Mask
Enter IP address in dotted-decimal notation.
Gateway
Enter IP address in dotted-decimal notation.
Target Name
The worldwide unique name of the target. Only iqn. format is accepted. Range is
from 4 to 223
iqu. xxx
Target Address
Enter Target address in IPv4, IPv6 or URL format. You need to configure DNS
server address in advance if input a URL string.
Target Port
Target Port.
Boot LUN
Hexadecimal representation of the LU number. Examples are: 4752-3A4F-6b7e-
3F99, 6734-9-156f-127, 4186-9.
Authentication Type
Authentication method: CHAP, Kerberos, or None.
CHAP / None
Save Changes
Must reboot system manually for changes to take place.
To Next Page
Loading...
