Tyco 801AP User Manual

DOCUMENT CONTROL NUMBER /
© 2002 Tyco Safety Products PAGE 1 of 10
801AP
17A-05-AP
211/02
Registered Office: First Floor North Building Walden CourtParsonage Lane Bishopís Stortford Herts CM23 5DB
EQUIPMENT:
PUBLICATION:
ISSUE No. & DATE:
Fig. 1 801AP MX Service Tool
801AP MX SERVICE TOOL
USER INSTRUCTIONS
1. INTRODUCTION
The 801AP MX Service Tool is used to program the loop address
into MX addressable devices. (A Quick Functional Reference
Table is detailed on page 10).
The 801AP displays information and performs tests on devices.
It has a 32 character backlit LCD alphanumeric display, arranged
in 2 rows of 16 characters and four ‘softkeys’, F1, F2, F3 and F4.
(The display format is shown in Fig. 5).
Power for the 801AP is derived from 4 AA size nickel metal
hydride rechargeable batteries. It may be run from an unregulated
+12V dc input ie, car cigarette lighter connection or 110/230V ac
mains adaptor, both of which will recharge the batteries as well.
The 801AP consists of the following:
• MX Service Tool
• Service Tool to ancillary connector lead
• 110 or 230V ac adaptor plus lead
• 4 x rechargeable AA size Nickel Metal Hydride
batteries
The 801AP is designed to be used as a desktop unit, clipped to a
trouser belt or be carried with a shoulder strap. The 801AP has
four external connections:
DC IN +12V From car cigarette lighter or
110/230V ac mains adaptor
AUX Ancillary connection port
PC PC connection port for use with
MX CONSYS (not yet available)
µP Internal micro-processor program
download port for use with PMS -
Program Management Software.
Detectors are programmed by placing the detector onto the
801AP and turning clockwise until fully engaged.
Ancillaries are programmed via the AUX port on the 801AP.
The ancillary programming cable consists of an RJ11
connector at one end and a custom moulded connector at the
other end.
2. TECHNICAL SPECIFICATION
2.1 MECHANICAL
Dimensions
HWD: 48 x 200 x 112mm
Weight
801AP Service Tool: 0.36kg
801AP Service Tool + batteries: 0.5kg
Materials
Top: FR ABS Dark Blue
Bottom: FR ABS Dark Blue

Tyco 801AP Specifications

General

Brand	Tyco
Model	801AP
Category	Service Equipment
Language	English

Summary

Introduction

Technical Specification

Mechanical Specifications

Details the physical dimensions and weight of the 801AP Service Tool.

Electrical Specifications

Outlines battery type, operating time, and AC adaptor requirements for the 801AP.

Environmental Specifications

Specifies operating temperature, storage temperature, and humidity for the 801AP.

EMC Compliance

Confirms the 801AP meets EU EMC Directive requirements for electromagnetic compatibility.

Operation

Starting Up and Battery Installation

Guides on installing batteries and initial power-on procedures for the 801AP.

Password Protection

Explains the 6-digit password entry, attempts, and expiry for the 801AP Service Tool.

Connecting to Devices

Instructions for connecting detectors and ancillaries to the 801AP Service Tool.

Button Operation

Describes how to navigate menus and select options using the softkeys on the 801AP.

Address Program and Analogue Values

Details the Address Program function and how to view Analogue Values of devices.

Device Measurement and Testing

Covers measuring temperature, CO level, running self-tests, and checking dirtiness/serial number.

Commissioning, Device ID, and LED Control

Explains commissioning date, device type ID, LED mode, digital inputs/outputs.

Terminal Tests, Backlight, and Power Settings

Covers terminal tests, backlight control, auto power-off, and customer code settings.

Additional Functions

Device Polling and Low Battery Indicator

Describes device polling intervals and the low battery flashing cursor indication.

CPU Reset and Intrinsically Safe Detectors

Explains CPU reset procedure and programming for Intrinsically Safe 800Ex detectors.

Accessories

Accessory Kit

Lists items included in the accessory kit for the 801AP Service Tool.

Spare Parts

Provides part numbers for spare ancillary leads, pins, and rechargeable batteries.