EasyManua.ls Logo

Tyco DPV-1 - Limited Warranty; Ordering Procedure; Ordering Assembled DPV-1 Valve Trim; Available Valve Accessories

Tyco DPV-1
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TFP1090
Page 25 of 26
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
Ordering
Procedure
Contact your local distributor for avail-
ability. When placing an order, indicate
the full product name and Part Number
(P/N).
Model DPV-1 Dry Pipe Valve with
Assembled European Conformity
Valve Trim
Specify: Fully Assembled Model DPV-1
Dry Pipe Valve with European Confor-
mity Valve Trim, P/N (specify, see Table
E).
Accessories
Specify: (description) for use with
(specify size) Model DPV-1 Dry Pipe
Valve, P/N (specify):
Supervisory Switch for
Accelerator
Control Valve ........... SUPSWITCHBI2DN15
Supervisory Switch for
Water Motor Alarm
Control Valve ........... SUPSWITCHBI2DN15
Air Pressure Relief Valve
Factory-set at 3,1 bar ...........92-343-1-020
Model WMA-1
Water Motor Alarm
Red Finish Gong ..............52- 630 -1-021R
A through Z Labels for
Attaching to Valve
Components ..................WS00000033
Supervisory Switch for
Alarm Test/Shut-off
Valve ........................WS00000011
Low Pressure Switch Kit .........CEDPV1LPS
SIZE
0
DN65
73,0 mm
3
DN80
88,9 mm
4
DN100
114,3 mm
6
DN150
168,3 mm
7 165,1 mm
TRIM
88
EUR/FM
with Three-Way Alarm Control Valve
89
EUR/FM
with Standard Alarm Test Valve
STOP VALVE
00
To be ordered
separately
SWITCH
1 PS10-1
END CONNECTION
27 Flange x Flange PN10/PN16
28 Flange x Groove PN10/PN16
2B Groove x Groove
P/N XX — X — XX — XX — X — XX
ACCELERATOR
00 None
01
European Conformity
Trim with
Accelerator
and Accelerator
Control Valve
TABLE E
MODEL DPV-1 DRY PIPE VALVE WITH EUROPEAN CONFORMITY TRIM
FULLY TRIMMED VALVE ASSEMBLIES
PART NUMBER SELECTION

Related product manuals