F3200/NDU AS4428.1 Installation Manual Document No: LT0255
System Specifications
Page 3-2 30 June 2004 Issue 1.04
3.1 GENERAL
3.1.1 FIP PART NUMBERS & DESCRIPTION
(Refer also to 3.8 following).
FP0780, F3200 AS4428 FIP, NO CARDFRAME, 24 ZONE MAX, 1931-95
FP0782, F3200 AS4428 FIP, NO CARDFRAME, 24 ZONE MAX, 1931-95, 6A PSU
Includes: Full size cabinet
Controller/Display with Operator Display & Keypad
MAF/PSU (includes 7 relays, 3A/6A Battery Charger)
1 x 8 Zone Module with standard EOLRs
Modules fit to cabinet rear wall (up to 3 modules max)
FP0781, F3200 AS4428 FIP, C/W CARDFRAME, 64 ZONE MAX, 1931-95
FP0783, F3200 AS4428 FIP, C/W CARDFRAME, 64 ZONE MAX, 1931-95, 6A PSU
Includes: Full size cabinet
Controller/Display with Operator Display & Keypad
MAF/PSU (includes 7 relays, 3A/6A Battery Charger)
Cardframe (can house up to 8 modules)
1 x 8 Zone Module fitted in Cardframe
includes standard EOLRs
FP0784, F3200 AS4428 FIP, SMALL CABINET, 1931-71, 8 ZONE
Includes: Small size cabinet
Controller/Display with Operator Display & Keypad
MAF/PSU (includes 7 relays, 3A Battery Charger)
1 x 8 Zone Module with standard EOLRs
Modules fit to cabinet rear wall (up to 4 modules max)
FP0876, F3200 AS4428, 8U CAB, 3A, 1U GAS CTL, PRE-PROG
Includes: FP0784 with 1 x 8 Relay Module and ME0442 fitted, wired and programmed
as a gas release panel.
FP0877, F3200 AS4428, STD CAB, 6A, 1U GAS CTL, PRE-PROG
Includes: FP0782 with 1 x 8 Relay Module and ME0442 fitted, wired and programmed
as a gas release panel.
3.1.2 SYSTEM EXPANSION
Expansion to the base panels is by adding 8 way Zone or Relay Modules, or by networking
multiple panels together.
FP0553, F3200 8 ZONE INPUT EXPANSION KIT
Includes: 8 Zone Module, FRC, 8 x EOLR (std).
FP0554, F3200 8 RELAY EXPANSION KIT
Includes: 8 Relay Module, FRC, 8 x Minijump links (for supervision selection).
3.1.3 ENVIRONMENTAL
Operating Temperature : -5°C to 45°C (Ambient)
Relative Humidity : 95% maximum @ 40°C (non-condensing)
To Next Page
Loading...
