F3200/NDU AS4428.1 Installation Manual Document No: LT0255
Introduction
Page 1-2 30 June 2004 Issue 1.04
1.1 SCOPE
This manual provides information for the personnel responsible for planning, ordering,
installing and configuring an F3200 Fire Alarm System or an NDU. It is assumed that such
staff have been trained to plan/install fire alarm equipment and are familiar with the relevant
standards.
The manual is divided into the following chapters:
Chapter 1 Introduction: Information on this and other manuals.
Chapter 2 System Description: A description of the structure of the F3200 FIP.
Chapter 3 Specifications: A detailed specification and list of part numbers for the F3200.
Chapter 4 Configuring a FIP: Information on configuring a system, in particular battery
and charger calculations.
Chapter 5 Installation & Wiring: Detail of installation and field wiring.
Chapter 6 Applications: Detail of configuration and wiring for specific applications.
Chapter 7 Alignment, Adjustment & Placing Into Operation: Detail on how to adjust an
F3200 in the field and place it into operation.
Appendix A 1. Compatible Detectors: A list of detectors which are approved for use
with F3200.
2. Detector Configuration: Detail on AZC and zone configuration for
specific detector types.
To Next Page
Loading...
