F3200/NDU AS4428.1 Installation Manual Document No: LT0255
System Specifications
Page 3-20 30 June 2004 Issue 1.04
3.7 DISPLAYS
Standard Display
Includes : LCD; FF LEDs; System Status LEDs
Panel Size : 19", 4U
LCD Size : 2 Lines of 40 characters, 5.5mm (H) x 3.2mm (W) per character
Site Name : 40 Characters max.
Zone Name : 30 Characters max.
Relay Name : 30 Characters max.
FF LEDs : ALARM (red); ISOLATED (yellow); FAULT (yellow); EXTERNAL
BELL ISOLATE (yellow); WARNING SYSTEM ISOLATE (yellow)
System
Status LEDs : MAINS ON (green); CHGR/BATT FAULT (yellow); SYSTEM FAULT
(yellow); AIF ATTENDED (yellow)
Internal : Mains On (green), Fuse Blown (yellow) on MAF/PSU PCB.
Status LEDs
Optional Additional LED Display
Requires 1 x ME0060 plus 1 x FZ3031 plus 1-3 x FP0475 as required.
ME0060, MECH ASSY, 1901-79, F4000 RAC, EXT INNER DOOR
(19", 7U, mounts up to 4 of 16 LED Display Bd)
FZ3031 KIT, F3200, 16 ZONE LED DISPLAY, LHS POSITION
FP0475, FP, F4000 DISPLAY EXTENDER KIT, 1901-26
Includes : 1 x 16 LED Display Bd (16 zone parallel LED display); FRC; Power
leads; zone name label.
Format : 7U Parallel LED display mounts directly below the standard 4U LCD.
Zone LEDs : ALARM (red); FAULT (yellow); ISOLATED (yellow)
Name Space : 10mm x 60mm per zone on paper label.
E.g. 2 lines of 23 characters at 10 per inch.
New Zealand Mode Display Extender Board
(applicable to NDU only)
Status LEDs: NORMAL (green), DEFECT (yellow), FIRE (Red)
PA0499,PCB ASSY,1901-119-1,F4000 NZ DISPLAY EXTENDER
To Next Page
Loading...
