
Do you have a question about the Tyco kENDALL KANGAROO ePump and is the answer not in the manual?
| Brand | Tyco |
|---|---|
| Model | kENDALL KANGAROO ePump |
| Category | Medical Equipment |
| Language | English |
Connect the power cord to the pump's AC adapter port for operation.
Instructions for connecting the battery and attaching the pole clamp.
Basic steps for starting the pump, including placement and power.
Procedures for loading pump sets and priming the pump for use.
Selecting and configuring feed modes, EZMODE, and adjusting parameters.
Running the pump, KTO, lock screen, hold, flush now, and options.
Accessing history, changing language, and configuring BioTech options.
Procedure to run self-diagnostic checks for pump performance.
Procedure to check the accuracy of the pump's flow rate.
Guidelines for safe and effective cleaning of the pump and its housing.
Specific instructions for cleaning the power cord and rotor assembly.
Details on general system errors, error numbers, and troubleshooting.
Troubleshooting for Hold, Rotor, Feed, Flush, Flow, and Pump Set errors.
Handling low battery alarms and pump set usage warnings.
Instructions and contact information for returning the pump for service.
Procedures for replacing the pump's side door and battery door.
Loading...