EasyManua.ls Logo

Tyco kENDALL KANGAROO ePump - Specifications

Tyco kENDALL KANGAROO ePump
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KANGAROO ePump
31
Enteral Feeding Pump
Figure 34. Running screen with the > 24
HRS of Pump Set Usage indicator in upper
left of the screen.
LED Array
The pump status LED array on the upper right of the pump gives a quick visual indication of the pump status, especially in darkened
rooms.
A green light status indicates normal pump operation.
A yellow light status indicates an informational or warning situation for a low battery condition, the pump in HOLDING mode, or one
of the following errors: HOLD ERROR, FEED ERROR, FLOW ERROR, and FLUSH ERROR.
A red light status indicates a critical pump error. The screen will show one of the following error messages: SYSTEM ERROR, PUMP
SET DISLODGED, or ROTOR ERROR.
Section X — Specifications and Symbols
Specifications
UL Listing
Medical Electrical Equipment
KANGAROO ePump™ Enteral Feeding Pump
(1) Classified with respect to electrical shock, fire, and mechanical hazards
in accordance with UL60601-1.
(2) Classified with respect to electrical shock, fire, mechanical and other
specified hazards in accordance with CAN/CSA C22.2 No. 601.1
Type Infusion Device
Volumetric
Pumping Mechanism
Rotary Peristaltic
Pump Sets
KANGAROO ePump MISTIC Feed-Only Set or Feed & Flush Set
Feeding Formula Delivery Rate
1-400 mL/hr in 1 mL increments

Table of Contents

Other manuals for Tyco kENDALL KANGAROO ePump