KANGAROO ePump™
7
Enteral Feeding Pump
Figure 3. Attaching and using the Pole Clamp or Cord Clip.
If cord restraint is preferred but use of the pole clamp is not desired, a cord restraint clip is provided with the KANGAROO ePump
enteral feeding pump. Using the pole clamp mounting bolt, follow the pole clamp assembly instruction to attach the cord clip (Refer
to Fig. 3).
Section V — Instructions For Use
Quick Start
1. Press POWER on lower, right-hand corner of control panel.
2. Open blue door enclosing Pump Set loading area.
3. To load Pump Set (refer to Figure 4):
To Next Page
Loading...