To Next PageTo Next Page
Need help?Do you have a question about the Tyco T1216R-C and is the answer not in the manual?
General| Brand | Tyco |
|---|---|
| Model | T1216R-C |
| Category | Control Panel |
| Language | English |
Overview of the T1200-C equipment range, including panels and repeaters.
List of Tyco part numbers, descriptions, and compatible standby batteries.
Order codes and descriptions for replacement motherboard and display parts.
Features of the RS485 serial interface board for repeaters.
Details on the fault-monitored link board for muster alarms.
Details on the module for signalling conditions to a VDR.
Table detailing inputs and outputs for T1204, T1216-C, and T1232-C panels.
List of key features including enclosures, charging, and zone configuration.
Description of the C1626 motherboard features and layout.
Description of the C1627 motherboard features and layout.
Description of the C1714 module for VDR connection and its outputs.
Features of the C1631 board for repeater communication.
Features of the C1665 board for muster interface functionality.
General features of all PSUs, including battery charging and monitoring.
Information on 24Vdc and 110/230Vac power supply units.
List of compatible manufacturers, part numbers, and device characteristics.
Explanation of panel indicators, their colours, and operating conditions.
Description of buttons and their functions for user operation.
Procedure for selecting zones/outputs for disablement, enablement, or testing.
Procedure for performing a one-man test on detector zones.
Explanation of how the delay mode functions and its configuration.
Overview of configuration process using DIL switches and Engineer's Select.
Procedure for selecting zones/outputs using Cursor Select in programming mode.
How to configure outputs as delayed or non-delayed.
